General Audio
Products including the popular Audionics Com2000 Talkback System, mixers, matrices, monitors and amplifiers.WM85
WM85 - Workstation Mixer
WM85 - Workstation Mixer
The MW85 workstation mixer is a compact 1U 19" rackmount mixing unit with integral mains power supply. The flexible design of this mixer will enable it to be used in a wide range of configurations and applications.
MR102
MR102 - Mixing Amplifier
MR102 - Mixing Amplifier
The MR102 mixer is ten input, two output, fixed gain, line level mixer, housed in a 1U 19" rackmount case with integral mains power supply. The unit is designed to enable any input or output to be connected to unbalanced equipment without affecting overall gain.
MM84
MM84 - Mixing Matrix
MM84 - Mixing Matrix
The MM84 is an eight input, four output, mixing matrix housed in a 1U 19" rackmount case with integral mains power supply. The unit is designed to enable any input or output to be connected to unbalanced equipment without affecting overall gain. The MM84 is part of Audionics' Ability range of quality audio equipment.
CS110
CS110 - Conference Splitter - Line Input
CS110 - Conference Splitter - Line Input
The CS110 is a high quality unit which distributes a common source to ten outputs. Each output can be independently switched to high or low level output to interface with a wide variety of recording equipment. The unit is designed to enable any output to be connected to unbalanced equipment without affecting overall gain.
CS110M
CS110M - Conference Splitter - Mic Input
CS110M - Conference Splitter - Mic Input
The CS110M is a high quality microphone distribution amplifier which distributes a controlled microphone signal to ten outputs. Each output can be independently switched to high or low level to interface with a wide variety of recording equipment. The unit is designed to enable any output to be connected to unbalanced equipment without affecting overall gain.
COM2 8WAY
Talkback Matrix 8 way
Talkback Matrix 8 way
The Audionics Com2000 Talkback System, available in both 8 and 16 way versions, is based around a central 1U 19", rackmounted talkback base station, with a choice of three different controller types. Controllers are connected to the base station via standard Cat5 data cabling, simplifying installation in both new and existing systems. An optional software package provides powerful facilities, for more complicated installations.
COM2 8C
2U 8way Controller
2U 8way Controller
The Audionics Com2000 Talkback System, available in both 8 and 16 way versions, is based around a central 1U 19", rackmounted talkback base station, with a choice of three different controller types. Controllers are connected to the base station via standard Cat5 data cabling, simplifying installation in both new and existing systems. An optional software package provides powerful facilities, for more complicated installations.
COM2 8DT
Desk Top Controller 8 way
Desk Top Controller 8 way
The Audionics Com2000 Talkback System, available in both 8 and 16 way versions, is based around a central 1U 19", rackmounted talkback base station, with a choice of three different controller types. Controllers are connected to the base station via standard Cat5 data cabling, simplifying installation in both new and existing systems. An optional software package provides powerful facilities, for more complicated installations.
COM2 16
16way Talkback Matrix
16way Talkback Matrix
The Audionics Com2000 Talkback System, available in both 8 and 16 way versions, is based around a central 1U 19", rackmounted talkback base station, with a choice of three different controller types. Controllers are connected to the base station via standard Cat5 data cabling, simplifying installation in both new and existing systems. An optional software package provides powerful facilities, for more complicated installations.
COM2 16C
2U 1way Controller
2U 1way Controller
The Audionics Com2000 Talkback System, available in both 8 and 16 way versions, is based around a central 1U 19", rackmounted talkback base station, with a choice of three different controller types. Controllers are connected to the base station via standard Cat5 data cabling, simplifying installation in both new and existing systems. An optional software package provides powerful facilities, for more complicated installations.
COM2 16DT
Desk Top Controller 16 way
Desk Top Controller 16 way
The Audionics Com2000 Talkback System, available in both 8 and 16 way versions, is based around a central 1U 19", rackmounted talkback base station, with a choice of three different controller types. Controllers are connected to the base station via standard Cat5 data cabling, simplifying installation in both new and existing systems. An optional software package provides powerful facilities, for more complicated installations.
COM2 OS
OS Interface Option
OS Interface Option
SC1
Audio Monitor Unit
Audio Monitor Unit
The SC1 Soundcheck Monitor unit is a compact (2U) 19" rackmount unit with integral mains power supply. Combining, in one unit, both aural and visual monitoring of several sources, it is an essential part of all audio installations.
SC1D
Digital Audio Monitor Unit
Digital Audio Monitor Unit
The SC1 Soundcheck Monitor unit is a compact (2U) 19" rackmount unit with integral mains power supply. Combining, in one unit, both aural and visual monitoring of several sources, it is an essential part of all audio installations.
RMU
Remote Monitor Unit
Remote Monitor Unit
The RMU remote monitor unit is a self contained 1U, rackmount, 10 input remote audio router. It is a simple solution to the problem of remote audio monitoring, dialling into the unit allows the user to quickly check the presence of audio on several audio paths and reduces fault finding time.
3150
Line Receiver
Line Receiver
The 3000 series line amplifiers are designed to interface land-lines with studio equipment providing galvanic isolation, impedance and level conversion. Both amplifiers are 160mm Eurocards and can be mounted in a 1U, 19", rackmount case or a 3U standard card frame.
3154
Line Driver
Line Driver
The 3000 series line amplifiers are designed to interface land-lines with studio equipment providing galvanic isolation, impedance and level conversion. Both amplifiers are 160mm Eurocards and can be mounted in a 1U, 19", rackmount case or a 3U standard card frame.
3000
1U Rackmount Case
1U Rackmount Case
The 3000 series line amplifiers are designed to interface land-lines with studio equipment providing galvanic isolation, impedance and level conversion. Both amplifiers are 160mm Eurocards and can be mounted in a 1U, 19", rackmount case or a 3U standard card frame.
3UCF
Wired Card Frame with PSU
Wired Card Frame with PSU
The 3000 series line amplifiers are designed to interface land-lines with studio equipment providing galvanic isolation, impedance and level conversion. Both amplifiers are 160mm Eurocards and can be mounted in a 1U, 19", rackmount case or a 3U standard card frame.
