Share |

Riedel MediorNet

MN/2RU
Mediornet 2RU frame with highspeed backplane, not including redundant power supply and fan for 16x16 HD/video and audio routing.
Chaque châssis MediorNet contient un router de 32x32 720p/1080i signaux, 184x184 SD-SDI signaux, 27 000x27 000 signaux AES ou une combinaison des trois.
MN/PSUR
Mediornet Wide input range power supply module for AC/voltage 9 to 264Vac, 150W output power,frequency range 47 to 63Hz, power cord connection on the rear side of the frame.
MN/FAN
Fan module with 3 speed controlled fans, horizontal air flow from left to right
MN/PSUF
Mediornet Wide input range power supply module for AC/voltage 9 to 264Vac, 150W output power,frequency range 47 to 63Hz, power cord connection on the front side of the frame.
MN/XSS
Mediornet 16x16 HD/video and audio router, processing card BNC connectors for frame synchronisation Sync IN compatible with Word/Clock, BlackBurst, TriLevel, Sync OUT for system/wide sync distribution, 100BaseT Fast Ethernet connection for configuration C, 1000BaseT Gigabit Ethernet for PC/network, 2 connectors for Artist intercom panels (RJ45 and BNC, both usable in parallel), 2 bidirectional MADI connectors (SFP and BNC), status indicators for all installed modules
MN/HD4 In
Mediornet SDI video input card 4 BNC connectors for up to 4 video sources (SD SDI, HD SDI) or up to two 3G/SDI video sources (both single linkand dual link support), automatic video format detection
MN/HD4 Out
Mediornet SDI video output card, 4 BNC connectors for up to 4 video devices (SD/SDI, HD/SDI) or up to two 3G/SDI video devices
MN/LNK2
Mediornet 2 channel link card, two SFP slots for single/mode and multi/mode SFP transceivers with 4.25Gb/s transfer rate, connection of up to two fibre pairs used for the interconnection of multiple Mediornet frames
MN/LNK4
Mediornet 4 channel link card, four SFP slots for single/mode and multi/mode SFP transceivers with 4.25Gb/s transfer rate, connection of up to four fibre pairs used for the interconnection of multiple Mediornet frames
MN/LNK8 CWDM
Mediornet 4 channel link card with integrated CWDM multiplexer/de/multiplexer, optical LC connector for one single/mode fibre pair used for the interconnection of multiple Mediornet frames
MN/LNK10 CWDM
Mediornet 10 channel link card with integrated CWDM multiplexer/de/multiplexer, optical LC connector for one single/mode fibre pair used for the interconnection of multiple Mediornet frames
MN/LNK18 CWDM
Mediornet 18 channel link card with integrated CWDM multiplexer/de/multiplexer, optical LC connector for one single/mode fibre pair used for the interconnection of multiple Mediornet frames
MN/MA2O
MADI card; digital audio; 2 SFP slots for optical SFP transceivers. (appropriate SFP modules e.g. 1090005 not included)
MN/MA2E
MADI card; digital audio; 2 BNC connectors (MADI IN and MADI OUT).
MN/MA2EO
Mediornet MADI card, digital audio, 2 BNC connectors (MADI IN and MADI OUT), SFP slot for optical SFP transceiver
MN/RN300
RockNet 300 Interface Card supports 128 audio channels
MN-FID
active backcover with frame status info for MN-2RU
MN/HDP 6
SDI video input / output card, 6 BNC: 1 + 2 Video In, 3 + 4 Video Out, 5 In / Out, 6 In / Out.The following combinations for SDI / HD-SDI can be realized: 4/2, 2/4,3/3, and for 3G: 2/1, 1/2, 1/1. Processing features 3 x format conversion / aspect ratio, 1 configurable quad split routable on any external or internal video signal path.
MN-ETH6
6 x 1000 BaseT Ethernet point to point interface card. Optical and electrical connection realized via adequate SFPs. (appropriate SFP modules 1990017 resp. 1990022 not included)
MN-Compact Basic
MediorNet 3RU frame, power supply and fan, 12 internal ports for fiber connections, 2 x SDI in , 2 x SDI out, 2 x Display Port out, 1 x Madi optical, 2 x AES (RJ45), 1 x Ethernet, 2 x Mic in, 2 x Line out, 1x Serial (RS232, RS422), 1 x Sync in, 1 x Sync out
SFP (200 Mbps/2km)
Mediornet SFP (200 Mbps/2km) for Madi Karte
MN/HD 6
SDI video input / output card, 6 BNC: 1 + 2 Video In, 3 + 4 Video Out, 5 In / Out, 6 In / Out.The following combinations for SDI / HD-SDI can be realized: 4/2, 2/4, 3/3,and for 3G: 2/1, 1/2, 1/1.
MN/HDO4I Video Input card 4 x optical
SDI video input card optical, 4 SFP slots for up to 4 video sources (SD/SDI, HD/SDI) or up to two 3G/SDI video sources, automatic video format detection, without. SFP modules
MN/HDO4O Video Output card 4 x optical
SDI video output card optical, 4 SFP slots for up to 4 video devices (SD/SDI, HD/SDI) or up to two 3G/SDI video devices, without SFP modules.
MN/MIO/T Multi I/O card
Multi I/O card for MN/MBP, 8x AES3, 8x analog audio I/O transformer balanced, 12x GPI, 4x RS422
MN/MBP
MediorNet breakoutpanel for MN/MIO, 8x AES, 8x AIO, 12x GPI, 4x RS422
MN/MIO/E Multi I/Ocard
Multi I/O card for MN/MBP, 8x AES3, 8x analog audio I/O electrically balanced, 12x GPI, 4x RS422
MN-Compact Plus
MediorNet 3RU frame, power supply and fan, 12 internal ports for fiber connections, 2 x SDI in , 2 x SDI out, 2 x Display Port out, 1 x Madi optical, 2 x AES (RJ45), 1 x Ethernet, 2 x Mic in, 2 x Line out, 1x Serial (RS232, RS422), 1 x Sync in, 1 x Sync out, RockNet Interface
SFP (200 Mbps/15km)
Mediornet SFP (200 Mbps/15km) for Madi Karte
MN-Compact Pro
MediorNet 3RU frame, power supply and fan, 12 internal ports for fibre connections, 4 x SDI in , 4 x SDI out, 2 x Display Port out, 2 x Madi optical, 4 x AES (RJ45), 3 x Ethernet, 4 x Mic in, 4 x Line out, 2x Serial (RS232, RS422),4 x GPI, 1 x Sync in, 3 x Sync out, Rocknet Interface
SFP/MN/MM/850/4,25Gbit/s (150m)
Mediornet 1 x LC/Duplex/Module for Mediornet, 1310nm, 4,25 Gbit/s, opt. Budget 5dB (P/out=9 to /2,5 dBm, P/in=/14 to 0 dBm), Distance to cover depending on attenuation of fiber used: 50/125ym Multimode/Fiber up to: 150m (500ft).
MN-Z-SFP-SM-HP-1310-3Gbit/s
1 x LC - Duplex-Module for MediorNet, 1310nm, 3 Gbit/s, especially for optical video input cards, opt. budget max. 9,6dB (P-out= -8,4 to -1 dBm, P-in = -18 to 0 dBm); Distance to cover depending on attenuation of fiber used: 9/125
MN-C-OPT-SDI-8O
MediorNet option board with 8 HD-SDI outputs
MN-C-OPT-SDI-8I
MediorNet option board with 8 HD-SDI inputs
SFP/MN/SM/1310/4,25Gbit/s (10km)
Mediornet 1 x LC/Duplex/Module for Mediornet, 1310nm, 4,25 Gbit/s, opt. Budget 9,6dB (Pout=8,4 to /1 dBm, P/in=/18 to 0 dBm), Distance to cover depending on attenuation of fiber used: 9/125ym Singlemode/Fiber up to: 10.000m (6,2mi)
SFP/MN/SM/HP/1310/4,25Gbit/s (40km)
Mediornet 1 x LC/Duplex/Module for Mediornet, 1310nm, 4,25 Gbit/s, opt. Budget max. 18dB (P/out=0 to 4 dBm, P/in=/18 to /3 dBm), Distance to cover depending on attenuation of fiber used: 9/125ym Singlemode/Fiber up to: 40.000m (25mi). Caution: A minimum line/attenuation of 7dB is required to prevent the receiver from overdrive
MN-C-OPT-SDI-4I4O
option board with 4 HD-SDI inputs and 4 HD-SDI outputs (only for MN-Compact Plus)
MN-C-OPT-ST-HP-SM1310
Fiber connection kit ST complete incl. high power 1310nm Single Mode SFP, optical budget 18dB, max. distance up to 40km with 9/125
MN-C-OPT-Neutrik-DualCON-HP-SM1310
Fiber connection kit Neutrik OpticalCON Duo complete incl. high power 1310nm Single Mode SFP, optical budget 18dB, max. distance up to 40km with 9/125
MN-C-OPT-Neutrik-QuadCON-HP-SM1310
Fiber connection kit Neutrik QuadCON complete incl. 2x high power 1310nm Single Mode SFP, optical budget 18 dB, max. distance up to 40km with 9/125
MN-C-OPT-Neutrik-QuadCON-WDM
WDM fiber connection kit Neutrik QuadCON complete incl. 6 x Single Mode SFP (1310nm / 1490nm / 1550nm) and 2 x WDM Mux/Demux for 6 Mediornet High Speed links, max. distance up to 10km with 9/125
MN-C-OPT-LC-WDM
WDM fiber connection kit dual LC Duplex complete incl. 6 x Single Mode SFP (1310nm / 1490nm / 1550nm) and 2 x WDM Mux/Demux for 6 Mediornet High Speed links, max. distance up to 40km with 9/125
MN-C-OPT-LC-HP-SM1310
Fiber connection kit LC Duplex complete incl. high power 1310nm Single Mode SFP, optical budget 18dB, max. distance up to 40km with 9/125
MN-C-OPT-Neutrik-QuadCON-SM1310
Fiber connection kit Neutrik QuadCON complete incl. 2x1310nm Single Mode SFP, optical budget 9.6 dB, max. distance up to 10km with 9/125
MN-C-OPT-Neutrik-DualCON-SM1310
Fiber connection kit Neutrik OpticalCON Duo complete incl. 1310nm Single Mode SFP, optical budget 9.6 dB, max. distance up to 10km with 9/125
MN-C-OPT-ST-SM1310
Fiber connection kit ST complete incl. 1310nm Single Mode SFP, optical budget 9.6 dB, max. distance up to 10km with 9/125
MN-C-OPT-LC-SM1310
Fiber connection kit dual LC Duplex complete incl. 1310nm Single Mode SFP, optical budget 9.6 dB, max. distance up to 10km with 9/125
MN-Z-SFP-SM-HP-1351-4,25Gbit/s
1 x LC - Duplex-Modul for MediorNet, 1351nm, 4.25Gbit/s, opt. Budget 18dB (P-out= 0 to 4 dBm, P-in = -18 to -3 dBm); Distance to cover depending on attenuation of fiber used: 9/125
MN-Z-SFP-SM-HP-1371-4,25Gbit/s
1 x LC - Duplex-Modul for MediorNet, 1371nm, 4.25Gbit/s, opt. Budget 18dB (P-out= 0 to 4 dBm, P-in = -18 to -3 dBm); Distance to cover depending on attenuation of fiber used: 9/125
MN-Z-SFP-SM-HP-1391-4,25Gbit/s
1 x LC - Duplex-Modul for MediorNet, 1391nm, 4.25Gbit/s, opt. Budget 18dB (P-out= 0 to 4 dBm, P-in = -18 to -3 dBm); Distance to cover depending on attenuation of fiber used: 9/125
MN-Z-SFP-SM-HP-1411-4,25Gbit/s
1 x LC - Duplex-Modul for MediorNet, 1411nm, 4.25Gbit/s, opt. Budget 18dB (P-out= 0 to 4 dBm, P-in = -18 to -3 dBm); Distance to cover depending on attenuation of fiber used: 9/125
MN-Z-SFP-1000baseT-CAT5
1 x CAT5 SFP Modul for Mediornet, especially for 1GB / 1000Base-T Ethernet Interfaces, max. approx. 100m cable length with CAT5 cable
MN-Z-2RU-Slot Cover
Cover Plate for empty card slots in 2RU Frame MN-2RU
MN-Z-SFP-SM-HP-1451-4,25Gbit/s
1 x LC - Duplex-Modul for MediorNet, 1451nm, 4.25Gbit/s, opt. Budget 18dB (P-out= 0 to 4 dBm, P-in = -18 to -3 dBm); Distance to cover depending on attenuation of fiber used: 9/125
MN-Z-SFP-ETH-SM-1310
1 x LC - Duplex-Modul for MediorNet, 1310nm, especially for Gigabit Ethernet, opt. budget 15dB; Distance to cover depending on attenuation of fiber used: 9/125
MN-Z-MIO Cable
Multi I/O cable, cable (1x 44 pin Sub-D) for interconnection of MN-MIO and MN-MBP
MN-Z-SFP-SM-HP-1431-4,25Gbit/s
1 x LC - Duplex-Modul for MediorNet, 1431nm, 4.25Gbit/s, opt. Budget 18dB (P-out= 0 to 4 dBm, P-in = -18 to -3 dBm); Distance to cover depending on attenuation of fiber used: 9/125
MN-MC-WDM-Q
WDM Dual Multiplexer and Demultiplexer (passive) for up to 6 duplex fiber connections, also recommended for interconnecting MediorNet frames. WDM connection with Neutrik QuadCon Singlemode. The 6 duplex fiber links must be connected via WDM single mode SFP's 1310nm/1490nm/1550nm. (SFP modules not contained) Insertion Loss max. 6.9dB, Output Loss max. 2dB. Compatible with MediorNet Compact WDM options MN-C-xxx-WDM. MC4 Modular Carrier chassis for up to 4 modules in one MC1 frame. All connections on the same front panel.
MN-MC-WDM-MC1-BLANK
Cover for empty MC12 slot in MC1 Rack Frame.
MN-MC-WDM-MC1
19" / 1RU Frame for up to 4 MC4 or 2 MC2 modules or any combination. Modules can be mounted reversed. Depth 250mm, includes variable slot separations, cover plates for empty slots not included.
MN-MC-WDM-LT
WDM Dual Multiplexer and Demultiplexer (passive) for up to 6 duplex fiber connections, also recommended for interconnecting MediorNet frames. WDM connection with Dual LC Duplex Singlemode. The 6 duplex fiber links must be connected via WDM single mode SFP's 1310nm/1490nm/1550nm. (SFP modules not contained) Insertion Loss max. 6.9dB, Output Loss max. 2dB. Compatible with MediorNet Compact WDM options MN-C-xxx-WDM. MC4 Modular Carrier chassis for up to 4 modules in one MC1 frame. WDM Neutrik QuadCon connection on the opposite side.
MN-MC-WDM-L
WDM Dual Multiplexer and Demultiplexer (passive) for up to 6 duplex fiber connections, also recommended for interconnecting MediorNet frames. WDM connection with Dual LC Duplex Singlemode. The 6 duplex fiber links must be connected via WDM single mode SFP's 1310nm/1490nm/1550nm. (SFP modules not contained) Insertion Loss max. 6.9dB, Output Loss max. 2dB. Compatible with MediorNet Compact WDM options MN-C-xxx-WDM. MC4 Modular Carrier chassis for up to 4 modules in one MC1 frame. All connections on the same front panel.
MN-MC-WDM-QT
WDM Dual Multiplexer and Demultiplexer (passive) for up to 6 duplex fiber connections, also recommended for interconnecting MediorNet frames. WDM connection with Neutrik QuadCon Singlemode. The 6 duplex fiber links must be connected via WDM single mode SFP's 1310nm/1490nm/1550nm. (SFP modules not contained) Insertion Loss max. 6.9dB, Output Loss max. 2dB. Compatible with MediorNet Compact WDM options MN-C-xxx-WDM. MC4 Modular Carrier chassis for up to 4 modules in one MC1 frame. WDM Neutrik QuadCon connection on the opposite side.
retour à sommaire

Hot products

MN/2RU
Mediornet 2RU frame with highspeed backplane, not including redundant power supply and fan for 16x16 HD/video and audio routing.
lire plus