The Latest in Audio System Management Processing

A Very Powerful 4 x 2500W Amplifier

With Plug & Play Network capabilities, Dante Integration

And a Fully Integrated Intelli DSP

High-fidelity Sound

  • Features
  • Dante
  • Specifications

IIR and FIR

The Intelli-series provides all the system management tools necessary for comprehensive system alignment and EQ, through to the provision of IIR and custom FIR based crossovers.

Auto IP

The Intelli-series is designed to interface easily into any existing (or bespoke) Ethernet network via internal 3-way Ethernet switches. Both automatic IP (DHCP) and static IP confi guration is provided as standard, enabling plug & play connectivity.

Synchronisation

Four sync options are available: Dante, AES A/B, AES C/D and internal. The Intelli-Power series manages synchronisation by providing a three-tiered redundancy approach, ensuring that if any sync source is lost, the Intelli-Power will automatically revert to another ensuring no loss in audio.

AES

Intelli-Power 10 I/O can be selected (in pairs) to be either analogue, AES/EBU or Dante audio network, enabling a mix of audio formats to be used simultaneousl

192 kHz

The new Intelli-series features a no-compromise design resulting in unmatched audio performance. The internal processing is selectable from 44.1 kHz to 192 kHz, providing full compatibility with both standard and high-end sample rate formats.

Dante

Intelli-Power 10 comes with a Fully redundant Dante Module. Enabling the device to be placed in any Dante audio over Ip network.

Dante audio over IP with full network redundancy

Intelli-Power 10 supports full redundant Dante audio over IP, an uncompressed, multi-channel digital media networking technology, with near-zero latency and synchronization. Dante is the preferred audio networking solution that has been adopted by more pro-audio AV manufacturers than any other networking technology. Interoperability is not a dream of the future, but a reality today.

Signal routing and system configuration with Dante is fast, simple, and incredibly flexible. Dante Controller is a powerful software application that manages devices on the network. Setting up a Dante network is typically just a matter of plugging devices into an Ethernet switch and connecting a computer to the network. All Dante devices are automatically discovered and displayed in Dante Controller, so you can be up and running in seconds.

Analog inputs

Connectors: 3-pin XLR (software switch-able between analog and AES-3)

Type: electronically balanced

Impedance: >10k ohms, balanced

Common mode rejection: >90dB

Max input level: 21 dBu, balanced

Frequency response: 20 Hz – 20 kHz, ±0.2 dB

THD+N: less than 0,005%, -20 dBu, 20Hz- 20 kHz, 22 kHz BW

Dynamic range: 121 dB, 20 Hz to 20kHz, un-weighted at +21dBu

Crosstalk: >90 dB

AD conversion: 24-bit, sigma-delta

AES-3 inputs

Connector: 3-pin XLR (software switch-able between analog and AES-3)

Type: transformer isolated

Impedance: 110 ohms, balanced

Supported formats: AES-3 up to 24-bit

Supported sample rates: 32 to 192 kHz

Link outputs

Analog: Feedthrough

AES-3: Active buffered with fallback

Networked audio inputs

Connector: 2x Ethercon

Supported formats: DANTE, AES67RTP, supports redundancy

Supported sample rates: 48 to 192 kHz

Power outputs

Connectors: 2x NL4 + 1x NL8

Power stage: class D, DC coupled driven from DAC

Ouptut power: 50Hz burst rms 1/3 12dB crest factor

4x 2500W, 2ohm

4x 2500W, 4ohm

4x 1600w, 8ohm

Frequency response: 20 Hz – 20 kHz, ±0.2 dB, load independant

Phase response: ±6 deg 20hz – 20kHz

THD+N: 0,005%, -20 dBu, 20Hz- 20 kHz, 22 kHz BW

Dynamic range: 123 dB, 20 Hz to 20kHz, un-weighted

Crosstalk: >90 dB

DA conversion resolution: 24-bit, DC coupled

Digital processing

Sample rate: 44,1kHz, 48kHz, 88,2kHz, 96kHz, 176,4kHz or 192kHz selectable

Internal processing: Dual TI C6000 32-bit floating point DSP’s

Input / output channel: 4 / 4

Network remote control

Built-in Ethernet switch: IEEE 802.3 10Base-T/100Base-TX

Connectors: 3 x Neutrik EtherCon, Auto MDI-MDIX

Protocol: Proprietary UDP/IP based, SNMP

Mains

Connector: Neutrik PowerCon 32A

Voltage: Internal selectable 115V/230Vac

115V: 90-132Vac, 47-63Hz

230V: 180-264Vac, 47-63Hz

Power consumption: 3600W

User processing functions

Gain: -80 to +15dB, 0,1dB steps

Polarity: normal / inverted

Delay:

Duration: 0 to 1500ms, sample rate depend steps,

Distance: 0 to 500m

Temperature: -20 to 50°C (-4 to 122°F), 0,1° steps

Relative humidity: 0 to 100%, 0,1% steps

PEQ:

Bands 12

Filter types: Bell-Symmetrical, Bell-Asymmetrical, Notch, Low-Shelving 6dB/oct, Low- Shelving 12dB/oct, High-Shelving 6dB/oct , High-Shelving 12dB/oct, All- Pass 90°, All-Pass 180°, High-Pass 6dB/oct, High-Pass 12dB/oct, High-Pass Vari-Q 12dB/oct, Low-Pass 6dB/oct, Low-Pass 12dB/oct, Low-Pass Vari-Q 12dB/oct, Band-Pass

Frequency: 10Hz to 22kHz, 0,1Hz steps

Gain: -40 to +15dB, 0,1dB steps (when applicable)

Q: 0,1 to 48, 0,01 steps (when applicable)

Compressor:

Threshold: -80 to 0dBfs, 0,1dB steps

Ratio: 1:1 to 20:1, 1 steps

Knee: hard or soft

Attack time: 0,5 to 100ms, 0,1ms steps

Release time: 5 to 5000ms, 0,1ms steps

Side-chain mode: flat, high-pass or band-pass mode

Make-up gain: 0 to +10dB, 0,1dB steps

Source select functions

Sources: Analog/AES-3/Dante

Routing: enabled/disabled

Speaker processing functions

Delay:

Duration: 0 to 1500ms, sample rate depend steps,

Distance: 0 to 500m

Temperature: -20 to 50°C (-4 to 122°F), 0,1° steps

Relative humidity: 0 to 100%, 1% steps

Driver alignment:

Duration: 0 to 30ms, sample rate depend steps,

Distance: 0 to 1029cm, 0,1cm steps (temperature and relative humidity
independent)

PEQ:

Bands 12

Filter types: Bell-Symmetrical, Bell-Asymmetrical, Notch, Low-Shelving 6dB/oct, Low- Shelving 12dB/oct, High-Shelving 6dB/oct , High-Shelving 12dB/oct, All- Pass 90°, All-Pass 180°, High-Pass 6dB/oct, High-Pass 12dB/oct, High-Pass Vari-Q 12dB/oct, Low-Pass 6dB/oct, Low-Pass 12dB/oct, Low-Pass Vari-Q 12dB/oct, Band-Pass

Frequency: 10Hz to 22kHz, 0,1Hz steps

Gain: -40 to +15dB, 0,1dB steps (when applicable)

Q: 0,1 to 48, 0,01 steps (when applicable)

High-pass and low-pass crossover:

Filter types: Butterworth 6 to 48dB/octave, 6dB steps

Linkwitz-Riley 12 to 48dB/octave, 12dB steps

Bessel 12 to 48dB/octave, 6dB steps

Frequency: 10Hz to 20kHz, 0,1Hz steps

FIR filters:

At 48 kHz: 5 x 1024 taps or 8 x 512 taps

At 96 kHz:     3 x 1024 taps or 8 x 512 taps

Gain: -80 to +15 dB, 0,1 dB steps

Polarity: normal / inverted

Limiter:

Type: Dual-stage, RMS + Peak limiter

RMS threshold: -80 to 0 dBfs (or dBu equivalent), 0,1 dB steps

Peak threshold: -80 to 0 dBfs (or dBu equivalent), 0,1 dB steps

RMS attack: 0,1 to 100 ms, 0,1 ms steps

Peak attack: 0ms

Release: 5 to 5000 ms, 0,1 ms steps

Operating

Temperature: 0° to 50° C

Relative humidity: 10 to 60 %, non-condensing

Storage

Temperature: -20° to 70° C

Dimensions

Unit

Width: 483 mm (19-inch)

Height: 88 mm (2HE)

Depth: 500 mm

Package

Width: 560 mm

Height: 160 mm

Depth: 560 mm

Weight

Unit (Nett): 15,5 kg

Package (Shipping): 17 kg

Intelli-Ware

Intelli-ware is designed to provide fast and intuitive control from both portable Touch and Tablet PCs, and tethered PCs. The interface mirrors the powerful, but intuitive design of the hardware, whereby operation is predominantly icon driven. Intelli-ware also provides comprehensive system-wide ganging , copy/paste and data management facilities, allowing complex configurations to be configured, presented and stored in a more efficient and intuitive way.

Learn More